欧美高清vivoesosexo10

  • <nav id="nntfl"><video id="nntfl"></video></nav>
  • ?
    ?
    Your Position:Home>Products> Releasing and Circulating Overshot>Releasing And Circulating Overshot
    linkedin facebook twitter google

    Releasing And Circulating Overshot

    Product Detail

      SERIES 150 OVERSHOT1429690227322738.jpg

      150 Releasing and Circulating Overshot is an external fishing tool for engage, pack off and retrieve tubular fish, especially for fishing drill collar and drill pipe. The grapple of the overshot can be designed for different sizes of fish, so one overshot can be dressed with different size of grapple components for fishing different sizes of fish.

      150 Overshot consists of three outside parts: Top Sub, Bowl, and Standard Guide. The Basic Overshot may be dressed with either of two sets of internal parts, if the fish diameter is near the maximum catch of the Overshot, a Spiral Grapple, Spiral Grapple Control, and Type “A” Packer are used. If the fish diameter is considerably below maximum catch size (?” or more) a Basket Grapple and a Mill Control Packer are used.
      When order please specify:
      ● The model of the overshot
      ● The hole, casing size or o.d. of overshot
      ● Top connection
      ● O.D of the fish

       

      FS = Full Strength
      SH = Slim Hole

       

      1429690056137650.jpg

       

      SERIES 150 OVERSHOT ACCESSORIES

      150 Releasing and Circulating Overshot can be equipped with a wide range of accessories to meet a variety of complex fishing environmental.1429691437179442.jpg

       

       

      Extension Sub
      An extension sub is assembled between the top sub and the bowl.It is used when the upper portion of the fish is damaged or cannot be engaged. This accessory will permit the overshot to be lowered far enough over the fish to ensure secure engagement and pack off. They are available in lengths from 24 to 60 inches. When ordering, specify overshot O.D. Unless otherwise specified Extension Subs will be furnished in a standard 36-inch length.

       

       

       

       

      Wall Hook Guide
      If the fish is positioned in a washed out section of the hole, it may be difficult to engage the top of the fish using a conventional overshot guide. A wall hook guide can be used to capture the neck of the fish, centralize it, and then properly guide the fish into the bowl.

       

       

       

       Oversize Guide1429691599199194.jpgOversized Guide properly guides the fish into the overshot when the hole size is considerably larger than the diameter of the fish and the overshot may pass alongside the fish without engaging it. Installation of an oversized guide instead of a standard guide will ensure alignment of the fish with the overshot.

       

       

       Mill Extension
      Overshot Mill Extension interiors are faced with ltcoloy to a size that will mill away a flared or jagged fish to enable it to pass up into and be engaged by the Grapple in the Bowl. Mill Extensions are installed between the Bowl and the standard, oversize or wall hook guides.

       

       

       Mill Guide
      Overshot Mill Guides are designed to remove badly flared or jagged metal from the top of the fish. Mill Guides are used in place of the Standard or Oversized Guide to trim the fish so it can enter the overshot.

       

    Shaanxi BRJ Petroleum Machinery Equipment Co.,Ltd
    Add: Room 2-1014,3rd building,Deyi international center,No.6 Changqing 2nd road,
    Economic and technological development zone,Xi'an,china
    Tel/Fax: 0086-29-89612241   Email: Sales@brj-oiltools.com  http://www.daewonvoice.com  
    欧美高清vivoesosexo10
  • <nav id="nntfl"><video id="nntfl"></video></nav>